" />

Canon Imageformula DR-2510M Scanner Driver Download

Thursday, June 7th 2018. | Canon imageFORMULA

Canon DR-2510M imageFORMULA Scanner printers contain advanced features which will make printing work easier and effective. But sometimes, you might run into a special glitches that can disturb your usual work. These problems can only be rectified by the use of expert instruction and support through complete diagnosis. To be able to resolve specialized issues confronted during operations, upgrading your DR-2510M imageFORMULA Scanner driver is necessary. Canon DR-2510M imageFORMULA Scanner Driver in the download section below.

Specification Canon DR-2510M imageFORMULA

  • Type Desktop Type Sheet Fed Scanner
  • Scanning Unit Sensor CMOS CIS 1 Line Sensor
  • Optical Resolution 600dpi
  • Light Source RGB LED
  • Scanning Side Front / Back / Duplex/ Skip Blank Page/ Folio
  • Scanning Speed DR-2010M:
  • B&W/ Grayscale 200/ 300dpi: 20ppm/40ipm
  • Colour 200dpi: 20ppm/40ipm; 300dpi: 13ppm/26ipm
  • DR-2510M:
  • B&W/ Grayscale 200/ 300dpi: 25ppm/50ipm
  • Colour 200dpi: 25ppm/50ipm; 300dpi: 15ppm/30ipm
  • Power Requirements AC100 – 240V (50/60Hz)
  • Power Consumption Scanning: 16W, Sleep mode: 2.2W, Power Turned Off:less than 0.5W
  • Operating Environment 10 – 32.5oC (50 – 90.5oF), Humidity: 20 – 80% RH
  • Environmental Compliance RoHS and ENERGY STAR


  • Width 50 – 216mm
  • Length 53.9 – 356mm
  • Thickness Automatic Feeding: 52 – 128g/m2 (0.06 – 0.25mm)
  • Bypass Mode: 40 – 157g/m2 (0.05 – 0.30mm)
  • International Standard Card Width: 53.9mm, Length: 85.5mm, Thickness: 0.76mm (Embossed card and horizontal scanning is supported)
  • Long Document Mode 1000mm max.
  • Paper Separation Retard Roller
  • Feeder Capacity 50 sheets (80g/m2)
  • Output Resolution 100 x 100dpi, 150 x 150dpi, 200 x 200dpi, 240 x 240dpi, 300 x 300dpi, 400 x 400dpi, 600 x 600dpi


  • Binary B&W / Error Diffusion / Advanced Text Enhancement I & II
  • Grayscale 8-bit (256 level) Grayscale
  • Colour 24-bit colour


  • Image Processing Auto Page Size Detection & Deskew
  • Skip Blank Page
  • Text Orientation Recognition
  • Auto Colour Detection
  • Colour Dropout (R/G/B) / Enhancement (Red)
  • Moire Reduction
  • Prevent Bleed Through / Remove Background
  • Batch Separation
  • Scan Area Setting
  • Folio Mode


  • Device Features Auto Power ON/OFF (via USB)
  • Rapid Recovery System
  • Double Feed Detection by length
  • Ultrasonic Double Feed Detection (DR-2520M)
  • Manual/ Bypass Feeding


  • Interface High Speed USB 2.0
  • Dimensions (mm) Tray closed: 298 (W) × 160 (D) × 160 (H) mm
  • Tray opened: 298 (W) × 490 (D) × 245 (H) mm
  • Weight Approx. 2.4 kg
  • Bundled Software For Mac OS X3: TWAIN Driver, CaptureOnTouch, Presto! PageManager, Presto! BizCard Reader
  • For Windows: ISIS/TWAIN Drivers, CaptureOnTOuch (Windows 2000/XP Prof XP/Home/Vista)


  • Consumable Exchange Roller Kit
  • Daily Duty Cycle Approx. 1,500 scans / day

Canon DR-2510M imageFORMULA Operating System Compatibility:

(Windows 10 (32 Bit), Windows 10 (64 Bit), Windows 7 32bit, Windows 7 64bit, Windows 8 32bit, Windows 8 64bit, Windows 8.1 32bit, Windows 8.1 64bit, Windows Vista 32bit, Windows Vista 64bit, Windows XP 32bit, Windows XP 64bit)Linux.

Canon imageFORMULA DR-2510C / DR-2510M driver download

Canon imageFORMULA DR-2510C Series driver download for Windows:

ISIS & TWAIN Driver v1.3 for Windows SP4

Support Windows 10/8.1/8/7/Vista/XP (32bit or 64bit)

File name: d13mmux_w_dr2510_v013_SP4.zip

Driver size: 15.7 Mb


Canon DR-2510M imageFORMULA Scanner Driver Language

English, Français, Español, Italiano, Deutsch, Dansk, Suomi, Nederlands, Norsk, Svenska, Ceština, Magyar, Polski, Português, Türkçe, Eesti, Lietuviu, Latviešu, Slovenšcina, Slovensky, Româna, Bahasa Indonesia.

Canon DR-2510M imageFORMULA Software & Driver Setup

Procedure 1: Driver Setup of Canon DR-2510M imageFORMULA via Free Download

Through this procedure, the setup of Canon DR-2510M imageFORMULA is performed with a so-called Automatic Wizard as you eliminate CD,

However you have to;

  1. Provide Canon DR-2510M imageFORMULA software file or its driver setup, which you can download from the link below.
  2. Have USB cable is essential for its function to connect both the printer device and the computer. USB cable is available in the printer box.

Afterward, pay attention toward the steps below to setup Canon DR-2510M imageFORMULA

  1. Switch ON both Canon DR-2510M imageFORMULA and your computer.
  2. Only if it is requested, you can connect the USB cable of Canon
  3. You can download the setup file, then install it anytime you want it by considering the step-by-step of the setup.
  4. Done with the setup, now you can pair Canon DR-2510M imageFORMULA USB cable with your computer. The wizard then will proceed the USB cable to ensure that both devices are properly connected. Another step-by-step for the setup will appear.
  5. You have to follow the setup instructions to complete the setup.
  6. Finish with the setup, Canon DR-2510M imageFORMULA is ready to use.

Procedure 2: To Setup Manually Canon DR-2510M imageFORMULA
Determine this procedure, “Add a printer” function that is an inbuilt feature of Windows is necessary.

Things to do:

  1. Download Canon DR-2510M imageFORMULA software file, if you don’t have on your system. Rest assured, the link is available below.
  2. You need Canon DR-2510M imageFORMULA USB cable to proceed the set up.

Setup Instruction:

  1. Switch ON both Canon DR-2510M imageFORMULA and your computer.
  2. Connect both devices above with Canon USB cable
  3. Prior the setup, you have to extract the downloaded file that is stored in TEMP folder.
  4. If your device operating system is XP, hit Fax and Printer” section. However, if you use Vista or Windows 7, find Control Panel, then hit “View Devices and Printer”.
  5. Move your mouse, then hit “Add a printer” feature.
  6. Keep in mind that you only give the path to the aforesaid feature, only if the feature is customized and ready.
  7. The instruction will pop-up, to complete the set up, you need only to follow the instructions.
  8. You finish the installation, Canon DR-2510M imageFORMULA will proceed your command smoothly.

Procedure 3: To Setup Canon DR-2510M imageFORMULA Svia Software CD
The setting up of Canon DR-2510M imageFORMULA with Automatic Wizard/Software CD

Ensure You Have:

  1. DVD/CD drive should be installed on your computer.
  2. Check your printer package to find Canon DR-2510M imageFORMULA software CD.
  3. You need the USB cable that you can find within the package.

Comply the below mentioned instructions to finish Canon DR-2510M imageFORMULA setup with Software CD.

  1. Make sure that your devices Canon DR-2510M imageFORMULA, and computer are ON.
  2. Before, it’s requested, connecting both devices using Canon DR-2510M imageFORMULA are not allowed.
  3. Infix the Software CD of Canon DR-2510M imageFORMULA to the computer DVD/CD drive. Follow the step-by-step instructions which are necessary for the setup.
  4. You can connect now the USB Cable of your printer Canon DR-2510M imageFORMULA to your computer, when you are instructed to.
  5. It takes some time until Canon DR-2510M imageFORMULA USB cable is detected by your computer. Instructions for the installation will appear afterward, you have to execute each step to complete the installation.
  6. At the moment the installation is complete, you can print with your Canon DR-2510M imageFORMULA, immediately.

Canon DR-2510M imageFORMULA printer driver Downloads for Microsoft Windows and Macintosh Operating System.

tags: , , , , ,